FAQ: How To Adjust The Carburetor On A 2004 Honda Metropolitan?

How do you Derestrict a Honda Metropolitan scooter?

How to Derestrict a Honda Metropolitan Scooter

  1. Take your Metropolitan’s kickstand off.
  2. Unscrew the six bolts holding the metal lid of your variator case in place and take the lid off of your scooter.
  3. Remove the front wheel in your variator system.

How do you adjust a Keihin carburetor?

Adjust the fuel/air mixture, by turning the low speed, idle adjustment screw on the bottom of the carburetor counterclockwise with a flat head screwdriver. Turn this adjustment screw no more than 1/8 of a turn at a time.

How fast can an unrestricted 50cc go?

Most 50cc scooters come with a restricted engine, which limits the bike to a top speed of 30mph (48kph). However, a 50cc scooter can go at speeds of up to 60mph (96kph), while most will comfortably reach 40mph (65kph).

How fast can you make a Honda Metropolitan?

The 50 cc Metropolitan is good for a maximum speed of 40 mph, averaging 100 miles per gallon or more. Fun and nimble, the Metropolitan’s performance is more about convenience and gas mileage that speed. However, there are several quick and easy ways to upgrade a Metropolitan, CHF50 scooter.

How do I reset my ECU scooter?

“disconnect battery leave for a minute, reconnect battery, start scooter and let it IDLE for 10 minutes minimum, this will reset the ECU and fuelling setting, engine revs may rise and fall during the idling this is where the ECU is finding the optimum setting.”

You might be interested:  How To Convert Fuel Injection To Carburetor?

Does carburetor cleaner work?

Most carburetor cleaners do the work for you, no scrubbing required. Readily available and affordable. Most auto parts stores will carry a few brands of carburetor cleaner. Typically less than $20, carburetor cleaners are a cheap, efficient way to improve the overall performance of your vehicle.

Why does my scooter keep cutting out?

An intake leak really messes up the air/fuel ratio on your scooter and this can cause idling issues or worse, piston damage. On many scooters this hose or ‘boot’ deteriorates over time due to heat exposure. A faulty rubber intake hose is one of the most common cause of intake issues on scooters.

Leave a Reply

Your email address will not be published. Required fields are marked *